| CVM | ||
|---|---|---|
| 12 | ||
| D | ||
| S |
| Model | CVM08 | CVM09 | CVM10 | CVM12 | CVM13 | CVM15 | CVM16 | CVM18 | CVM20 |
|---|---|---|---|---|---|---|---|---|---|
| Workpiece Hole Diameter(Standard Diameter)(mm) | 8H8 | 9H8 | 10H8 | 12H8 | 13H8 | 15H8 | 16H8 | 18H8 | 20H8 |
| Workpiece Hole Diameter(Substandard Diameter)(mm) | 8.1-8.8 | 8.9-9.9 | 10.1-11.3 | 11.4-12.7 | 12.8-14.2 | 14.3-15.7 | 15.8-16.9 | 17.0-18.4 | 18.5-19.9 |
| Locating Repeatability(mm) | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 |
| Offset Tolerance(C: cut)(mm) | ±0.05 | ±0.05 | ±0.10 | ±0.10 | ±0.10 | ±0.10 | ±0.15 | ±0.15 | ±0.15 |
| 定位力(2.5MPa時) | 260 | 260 | 260 | 260 | 260 | 260 | 290 | 290 | 290 |
| 定位力(5.0MPa時) | 430 | 430 | 430 | 430 | 430 | 430 | 470 | 470 | 470 |
| 定位力(7.0MPa時) | 510 | 510 | 510 | 510 | 510 | 510 | 550 | 550 | 550 |
| Allowable Thrust Load(KN) | 1.5 | 1.5 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 |
| Cylinder Capacity (Lock side)(cm³) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.11 | 0.11 | 0.11 |
| Cylinder Capacity (Release Side)(cm³) | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | 0.15 | 0.15 | 0.15 |
| Max. Operating Pressure(Mpa) | 7 | 7 | 7 | 7 | 7 | 7 | 7 | 7 | 7 |
| Min. Operating Pressure(Mpa) | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Range of Temperature(°C) | 0~70 | 0~70 | 0~70 | 0~70 | 0~70 | 0~70 | 0~70 | 0~70 | 0~70 |
| Weight(g) | 90 | 90 | 90 | 95 | 95 | 100 | 115 | 120 | 125 |
